Our headline service · Bath & Bristol
Permeable, SUDS-compliant resin bound driveways laid over a properly prepared base. Stone-aggregate finish that suits period and modern homes alike. From £85/m².
Why resin
Resin bound driveways are made by mixing a clear, UV-stable resin with natural stone aggregate, then trowelling it across a properly prepared sub-base. The result drains straight through (no SUDS planning application needed), grips like tarmac, and reads as natural stone — which is why it's become the default premium driveway choice across Bath's conservation streets.
Done well, a resin driveway lasts 15 to 20 years before it needs anything more than a jet wash. Done badly — wrong base, cheap resin, wrong aggregate ratio — it fails within two winters. The difference is the installer, not the product.

What you get with us
A resin driveway is only as good as what's underneath it. Here's exactly what goes into every job we quote.
We check existing levels, drainage falls, threshold heights and access. Often spots problems other quotes miss.
Dig to spec depth (typically 150–200mm), Type 1 MOT laid in compacted layers. The base is the job.
A 40–50mm permeable binder course that allows water to pass through the system, not pool on top.
Block, granite, steel or aluminium edge restraint. Threshold drains, channel drains and reinstatement of grass / borders included.
Aggregate and UV-stable resin mixed on-site at the correct ratio (typically 7:1), hand-trowelled to a 15–18mm finish.
Foot traffic the next morning, cars by 24–48 hours. 10-year written guarantee in your inbox.

Aggregate choice
We carry a curated range of UK and European aggregates chosen to read well against Bath stone, painted Georgian frontages, and modern render. Common picks:
Investment
A typical Bath residential resin driveway lands between £85 and £130 per m² fitted, depending on aggregate, base condition and access. Roughly:
Resin bound laid over an existing sound tarmac or concrete base in good condition. The fastest option.
Excavate, full MOT sub-base, open-grade binder, resin bound. The most common Bath spec.
Full system plus charcoal granite edges, threshold drainage, integrated lighting and high-end aggregate.
Prices indicative for typical access & ground conditions. We quote every job individually after a free site visit.
Resin driveway FAQs
A properly installed resin driveway in Bath typically lasts 15 to 20 years before it needs anything more than a jet wash. Lifespan depends entirely on base preparation — get that right and the surface outlasts most block paving installations.
For most domestic resin driveways in Bath you don't — resin bound is fully permeable and counts as SUDS-compliant under the 2008 Town & Country Planning regulations. We'll flag if your property is in a conservation area or listed.
Usually yes, if the existing tarmac or concrete base is sound, level and well-drained. We'll survey it free of charge — about 40% of overlay quotes we issue end up needing a full base because the existing one isn't up to spec. Better to know up front.
A typical 40–60m² Bath residential driveway takes 3 to 5 working days from start to finish, weather permitting. Resin can't be laid below 5°C or in heavy rain, so we plan around forecasts.
No — resin bound is a fully sealed surface. Weeds only ever grow from debris that settles on top, easily removed with a jet wash once or twice a year.
10 years written workmanship guarantee on every resin driveway we install. The resin manufacturer's product guarantee sits behind that.